
The A600 Series current probes are specifically designed to support measurements with the TekMeter® or oscilloscope.
More +
The P6248, P6247, and P6246 Differential Probes enable users to make time-domain or frequency-domain measurements on high bandwidth signals commonly found in disk drive,
More +
The P7700 Series TriMode probes provide the highest probe fidelity available for real-time oscilloscopes.
More +
A low voltage single-ended probe is typically used for measuring high-speed, ground referenced signals up to 12 V. These low voltage probes are the best choice for making measurements on high impedance, high frequency circuit elements which require minimal probe loading.
More +
TAP1500 and TAP1500L Single-ended Active FET Probe provides excellent high-speed electrical and mechanical performance required for today''s digital system designs.
More +
The CT6 is the newest addition to the Tektronix portfolio of high frequency current probes
More +
Tektronix passive probe solutions provide high reliability and testing accuracy for basic oscilloscope measurements. The P2220 and P2221 are compact passive probes with selectable 1X/10X attenuation designed for use with selected Tektronix oscilloscopes.
More +
A low voltage single-ended probe is typically used for measuring high-speed, ground referenced signals up to 12 V
More +
The P6021 and P6022 Current Probes provide versatile AC current measurements. Both probes provide accurate current measurements over a wide range of frequencies. The P6021 and P6022 allow current measurements without breaking the circuit by clipping onto the current carrying conductor.
More +
The TRCP Series Rogowski current probes are equipped with a BNC connector and work with any instrument supporting the BNC interface. Rogowski probes allow you to easily connect to large connection points such as bus bars or connect to small IC legs on a MOSFET or IGBT.
More +
The DPO7OE series optical probes with a DPO70000 real-time scope deliver the performance and advanced debug capabilities designers need to fully troubleshoot 400G PAM4 signals
More +
A high voltage single-ended probe is typically used for measuring ground referenced signals up to 40 kV
More +
The P6139B and P5050B probes are high bandwidth, high impedance 10X passive voltage probes with 10 MΩ input resistance.
More +
The ADA400A Differential Preamplifier allows direct oscilloscope measurements of very low amplitude voltages and signals which are not ground referenced. The high impedance of both inputs eliminates the need to add additional ground points in the DUT, thereby avoiding circulating currents which disturb the measurement or the circuit.
More +
The P7600 Series TriMode probes, the MSO/DPO70000DX, DPO/DSA70000D, and the DPO714AX Oscilloscopes are designed to deliver the industry''s lowest system noise levels. This high sensitivity is critical for being able to make accurate measurements on low amplitude signals.
More +
ritu@rituchina.com
Markting@rituchina.com
Shenzhen Headquarters: Nanshan, Liuxian Avenue, Nanshan District, Shenzhen, Guangdong Province
East Building, 1st Floor, Building 6, Phase II of Yungu Innovation Industrial Park
0755-8368 0722(8 lines)
1403880343
粤公网安备 44030502008393号