Teseq NSG3040A Conducted Transient

Immunity Test System

The all-in-one Teseq NSG3040A conducted transient immunity test system from Swiss brand Teseq integrates multi-type EMC interference simulation including EFT burst

Teseq NSG 3060A Modular Conducted Transient

Immunity Test System

The modular Teseq NSG 3060A conducted transient immunity test system adopts master-slave expandable architecture, integrating 6.6 kV combination surge,

Teseq NSG 4070C Test System for

Conducted & Radiated RF Immunity

The Teseq NSG 4070C all-in-one RF conducted & radiated immunity test system integrates a 4 kHz~1 GHz full-band signal generator and three high-precision power meters

Teseq NSG 438 30 kV ESD Electrostatic

Discharge Simulator

The flagship Teseq NSG 438 30 kV ESD simulator supports up to 30 kV air and contact discharge, equipped with standard IEC discharge network and over 60 optional RC networks to meet strict automotive OEM ESD requirements.

Teseq NSG 437 30 kV Electrostatic

Discharge (ESD) Simulator

The compact mains-powered Teseq NSG 437 30 kV ESD simulator supports up to 30 kV air and contact discharge

Rohde & Schwarz R&S®ENV432 32 A Four-Line V-Type

Artificial Mains Network

The R&S®ENV432 32 A four-line V-type artificial mains network from Rohde & Schwarz supports 32 A continuous current across all three phases plus neutral line

Rohde & Schwarz R&S®ENV216 Two-Wire V-Type

Artificial Mains Network

The two-wire V-type artificial mains network R&S®ENV216 from Rohde & Schwarz provides 16 A rated single-phase L/N current

Rohde & Schwarz R&S®ENV4200 200 A Four-Line V-Type

Artificial Mains Network

The R&S®ENV4200 200 A four-line V-type artificial mains network from Rohde & Schwarz supports up to 200 A continuous current across all four phases

Rohde & Schwarz R&S®ESRP EMI

Test Receiver

The R&S®ESRP EMI Test Receiver is dedicated to diagnostic measurements and precompliance testing during the product development phase, preparing devices for final certification tests.

Rohde & Schwarz R&S®EPL1000 EMI

Test Receiver

The cost-effective R&S®EPL1000 conducted EMI test receiver from Rohde & Schwarz covers 5 kHz to 30 MHz for full-band household appliance emission tests, fully complying with CISPR 16-1-1 as standard equipment.

Rohde & Schwarz R&S®ESR Mid-Range

Compliance EMI Test Receiver

The mid-range compliance-grade R&S®ESR EMI test receiver from Rohde & Schwarz offers three frequency variants up to 3.6 GHz

Schwarzbeck VULB 9168 TRILOG Hybrid Biconical Log-Periodic

Broadband Test Antenna

The Schwarzbeck VULB 9168 TRILOG hybrid log-periodic broadband antenna adopts integrated biconical + log-periodic structure

Schwarzbeck MDS 21 C Absorbing Clamp

The standard Schwarzbeck MDS 21 C absorbing clamp covers 30 MHz to 1 GHz

Schwarzbeck STLP 9128 E special Compact

Stacked Log-Periodic Broadband Test Antenna

The compact stacked log-periodic STLP 9128 E special from Schwarzbeck adopts dual stacked dipoles to deliver 2 dB higher gain

Schwarzbeck BBHA 9120 D Double Ridged

Broadband Horn Antenna

The Schwarzbeck BBHA 9120 D double ridged broadband horn antenna covers ultra-wide high frequency 0.8 GHz to 18 GHz

Schwarzbeck STLP 9149 Stacked Microwave

Log-Periodic Broadband Test Antenna

The Schwarzbeck STLP 9149 stacked microwave log-periodic antenna covers ultra-wide mid-to-high frequency 0.6 GHz to 10.5 GHz